Virtual Router

Virtual Router

A router is a kind of computer programmed mainly for appropriate transport of advice. Routers have exceptional operating systems for example Juniper Networks JUNOS & JUNOSe, Extreme Networks XOS, or the IOS of Cisco. Also contained are NVRAM, RAM, flash memory as well as central processing units and network interfaces.

The virtual router is a networking device without the need for cables. It’s normally used for connection to the Internet and other computer network. Routers are operational in a mixture of wired and wireless local area network or wired local area network, wireless only local area network.

A wireless network is setup for sharing access to printers, the web, files, and other computer functions. Wireless network is also used for convenience in dwellings and offices. One can have access to the internet and local network connection anywhere in at home or the office. Installation and setup are worth the efforts.

Step one in virtual router installation will be to select the gear that is right. Gear should be in accordance with set-up that is desired. The equipment should be supporting of the three wireless networking technologies. The three wireless networking technologies are 802.11a, 802.11b, and 802.11g.

Virtual Router

A computer should have built-in networking support or a wireless network adapter. Be sure that a virtual router is not a wireless access point and available. Unplug first the internet modem before connecting the virtual router. The modem should maintain direct connection to the Internet. When all of the devices are interconnected, the virtual router would maintain communication with the Internet. Download the software fromĀ  http://www.virtual-router.com.

Make sure the proper interconnections are performed. There are variances of joining interfaces with respect to the models and producers of the virtual routers in the labels. These differences in labeling doesn’t matter, the most important thing is the functions of the devices connected to the routers.

Now you can start configuring the virtual router. The network cable will function as the virtual router for the meantime and a connection between the computer. Open the internet browser and start configuring the router. The router’s instruction module provides password and the address to be used.

The internet browser reveals the virtual router’s configuration page. The user should configure three things unique to the user’s network just. First is the wireless network name, otherwise referred to as the SSID. Next, there is a network protection needed. This protection could be in the form of a Wireless encryption (WEP) or Wi-Fi Protected Access (WPA). An administrative password, which commands the wireless network, should even be used.


The last step in creating the virtual router is joining the computer. The computer should be linked through the wireless network port. Additionally, it may be connected by the USB port by wireless network adapter. The on screen directions will direct the user in the configuration procedure.